Heatit Z-Water 2 Z-Wave 800 series

Heatit Z-Water2 is a DIN-rail regulator for controlling waterbased heating systems. The module clips right onto a DIN-rail and allows you to control your waterbased heating through your Z-Wave network. Heatit Z-Water2 is equipped with 9 potential free relays for actuators. It also has 2 analog inputs for temperature sensors.

The Heatit Z-Water2 relays may be controlled by associations with other Z-Wave thermostats e.g Heatit. Each relay can control one or several actuators in your heating system.

Features:

• Regulator for waterbased heating systems
• 9 potential free relays
• Valve exercise
• Can control 230VAC actuators and 24V actuators from an external power supply
• Can be used with Heatit thermostats in each heating zone
• DIN-rail mounting
• Connector for external antenna
• SmartStart
• Firmware update (OTA)
• Supports encryption mode S0, S2 Authenticated Class, S2 Unauthenticated Class
• IOT Protocol: Z-Wave - 868.4 MHz (EU)
• Voltage: 230VAC 50Hz
• Own power usage (watt):0.4
• Protection grade (IP): IP20
• Ambient humidity (RH non-condensing %): 10-85
• Ambient temperature range in storage (°C): -30-70
• Total gross effect (W): 1350
• Range (max no. meters): 40
• IOT Chip type:Z-Wave 800 chip
• Dimensions (WxHxL) 105 x 90 x 59 mm