Shelly Qubino Wave i4 DC

Z-Wave™ 4-digital inputs controller for enhanced actions control​.
Manually activate or deactivate any created scene, run synchronized actions, or execute complex trigger scenarios. ​

Replace one of the switches in your room and control any other installed Z-Wave device!
Wave i4 DC allows you to manually activate or deactivate any created scene, run synchronized actions, or execute complex trigger scenarios. You can use it to control other Z-Wave devices within your network with one push of a button. Due to its retrofit design, it is small enough to fit behind every wall switch. Wave i4 DC can show the status and control the action of four inputs, offering maximum convenience by enabling manual control of your smart home to all family members.​

Shelly Qubino works on Z-Wave.
By using Z-Wave, smart home products can seamlessly communicate with each other, regardless of their brand or platform, thanks to a centralized smart hub! Shelly Qubino devices work on the latest Z-Wave chip generation (S800), one of the most popular standardized technologies for smart homes in the world. 

Multi-click support​.
Up to 12 possible actions. Control the lights, close the blinds, turn off outlets. Manually control any Z-Wave device within your network and run the scenes you desire.

Wide range of voltage support.
Wave i4 DC can be powered by 5-24 V DC.​

Associations .
Establish direct communication between devices in your Z-Wave local network and set actions with no hub present! Configure up to 8 associations on the switch buttons and trigger them manually. 

Smart scenes.
Set custom scenes by combining Wave i4 DC with any other Z-Wave devices (gateway required). ​

Multi-actions support.
With a simple push of a button, you can activate up to 12 scenes or actions from other Z-Wave devices in your network. Wave i4 DC supports up to 3 different automation actions per button, which makes it extremely convenient for quick manual control over a group of devices.​ 

Install Wave i4 DC where it is the most convenient for you and set buttons to simultaneously control lights, blinds, and other devices in specific rooms or entire building. ​

Trigger up to 8 actions without a gateway!
Wave i4 DC  allows you to establish direct communication between your Z-Wave devices and set various associations without requiring a hub!* By supporting 2 associations per button, Wave i4 DC enables you to trigger and execute up to 8 actions and thus seamlessly control multiple Z-Wave devices with a simple press of a button. ​

Ultimate comfort.
One of the most frustrating things is to realize you forgot to switch off the lights in the living room before you go to bed. Especially when your phone is nowhere around. But there is no need to worry! Wave i4 DC allows manual control of other Z-Wave devices with a switch. Now the full control of your house is just one hand away!​

Perfect match.
Wave i4 DC is perfect for Shelly Wall Switch for Smart Relays – a 4 button switch. Each button can activate up to 4 different actions. That means that only one 4 button switch would allow as much as 16 scenes trigger and execution! Thanks to its compact dimensions and simple wiring, Shelly Wall Switch​ can fit into any existing switch console or even the tiniest spaces. No expansion of the wall space or any changes in the wiring needed!

Features:

• Power supply: DC 5-24 V
• Power consumption: < 0.3 W
• Number of inputs: 4
• Distance: Up to 40 m indoors (131 ft.) (depends on local condition)
• Z-Wave repeater: Yes
• CPU: Z-Wave S800
• Z-Wave frequency band: 868,4 MHz
• Conductor cross section 0.5 to 1.5 mm² / 20 to 16 AWG
• Ambient temperature: -20°C to 40°C / -5°F to 105°F
• Humidity: 30 % to 70 % RH
• Dimensions (WxHxL) 40 x 36 x 15 mm