HELTUN HE-TPS Advanced Programmable Touch Panel Switch brings "Impossibly Smart" capabilities to your home lighting, electric outlets, or motorized blinds, door locks, gates, and valves. It replaces an existing in-wall switch and brings over-the-Internet monitoring, control, and advanced programmability. The Touch Panel is "Impossibly Thin" on the wall yet packed with features to provide the ultimate in control and convenience.
- Controls 2 AC and DC devices, even at the same time
- Don’t buy extra sensors: ambient light, humidity, and room temperature are already included to create custom scenarios
- Auto adjust backlight brightness based on ambient light level
- Adjust touch sensitivity the way you want
- Work with any Z-Wave hub: you’re free to integrate it into your existing system or create your own based on your personal requirements
Compatible with: Aeotec, ComfortClick, Eedomus, Ezlo, Fibaro HC LITE, HC2, HC3, Jeedom, Home Assistant, Homey, Hubitat, RazBerry, SmartThings, Thinka, Zipato gateways and Z-Wave JS library
Specifications
- Front frame dimensions: 89x89x9mm
- Back dimensions: 53x53x28mm
- 3 frame colors: Silver, Black, White
- 2 glass colors: White, Black (Yellow, Green, Red, Blue on request)
- 2 sensitive capacitive touch buttons
- Red and Blue color LED back light for each button
- 10 adjustable brightness levels for each button backlight
- Power supply: 85VAC – 265VAC, 50Hz/60Hz or 24-48VDC
- 2 relays with resistive load of up to 5A each
- 2 independent relay inputs, dry contact type
- Relay life time: 100 000 switches
- Z-Wave Frequency: All countries
- Z-Wave SDK: V7.11.1
- Z-Wave Plus module: ZGM130S
Features
- Security levels: Non-Secure, S0, S2, S2 authenticated
- Smart Start inclusion
- Independent control of each relay and LED
- Each relay can be controlled by any touch button or via a Z-Wave network (Z-Wave controller)
- Each touch button can be used to run scenarios
- Each button backlight can be configured to indicate the state of relay output, touch button, associated device, mode of connected gateway
- Embedded ambient light sensor
- Embedded room temperature sensor
- Embedded humidity sensor
- Software energy consumption meter logic
- Adjustable LCD brightness: Auto or Manual
- Child lock
- OTA firmware updates
- Manual change of frequency
Button Configurations
Each touch button can be configured to control any relay (one or two) output state as follows:
- press the button and the relay output goes to an ON state only
- press the button and the relay output goes to an OFF state only
- press the button and the relay output inverts the state
- press the button and the relay output goes to ON for the specified time, then changes back to OFF
- press the button and the relay output goes to OFF for the specified time, then changes back to ON
- when the button is held the relay output is ON, as soon as the button is released, the relay output state changes to OFF
- when the button is held the relay output is OFF, as soon as the button is released, the relay output state changes to ON
