MobileHome

Touch Panel Switch Quinto

PrintEmail
Array
Colour Χρώμα

 

HELTUN HE-TPS Advanced Programmable Touch Panel Switch brings "Impossibly Smart" capabilities to your home lighting, electric outlets, or motorized blinds, door locks, gates, and valves. It replaces an existing in-wall switch and brings over-the-Internet monitoring, control, and advanced programmability. The Touch Panel is "Impossibly Thin" on the wall yet packed with features to provide the ultimate control and convenience.

  • Controls up to 5 AC and DC devices, even at the same time
  • The only device with 5 relays and 5 buttons on the market
  • Don’t buy extra sensors: ambient light, humidity, and room temperature are already included to create custom scenarios
  • Auto adjust backlight brightness based on ambient light level
  • Adjust touch sensitivity the way you want
  • Work with any Z-Wave hub: you’re free to integrate it into your existing system or create your own based on your personal requirements

 

Compatible with: Aeotec, ComfortClick, Eedomus, Ezlo, Fibaro HC LITE, HC2, HC3, Jeedom, Home Assistant, Homey, Hubitat, RazBerry, SmartThings, Thinka, Zipato gateways and Z-Wave JS library

 

Specifications

  • Front frame dimensions: 89x89x9mm
  • Back dimensions: 53x53x28mm
  • 3 frame colors: Silver, Black, White
  • 2 glass colors: White, Black (Yellow, Green, Red, Blue on request)
  • 5 sensitive capacitive touch buttons
  • Red and Blue color LED back light for each button
  • 10 adjustable brightness levels for each button backlight
  • Power supply: 85VAC – 265VAC, 50Hz/60Hz or 24-48VDC
  • 5 relays with resistive load up to 5A each
  • 2 independent relay inputs, dry contact type
  • Relay life time: 100 000 switches
  • Z-Wave Frequency: All countries
  • Z-Wave SDK: V7.11.1
  • Z-Wave Plus module: ZGM130S

 

Features

  • Security levels: Non-Secure, S0, S2, S2 authenticated
  • Smart Start inclusion
  • Independent control of each relay and LED
  • Each relay can be controlled by any touch button or via a Z-Wave network (Z-Wave controller)
  • Each touch button can be used to run scenarios
  • Each button backlight can be configured to indicate the state of relay output, touch button, associated device, mode of connected gateway
  • Embedded ambient light sensor
  • Embedded room temperature sensor
  • Embedded humidity sensor
  • Software energy consumption meter logic
  • Adjustable LCD brightness: Auto or Manual
  • Child lock
  • OTA firmware updates
  • Manual change of frequency

 

Button Configurations

Each touch button can be configured to control any relay (from one and up to five) output state as follows:

  • press the button and the relay output goes to an ON state only
  • press the button and the relay output goes to an OFF state only
  • press the button and the relay output inverts the state
  • press the button and the relay output goes to ON for the specified time, then changes back to OFF
  • press the button and the relay output goes to OFF for the specified time, then changes back to ON
  • when the button is held the relay output is ON, as soon as the button is released, the relay output state changes to OFF
  • when the button is held the relay output is OFF, as soon as the button is released, the relay output state changes to ON